OTDR TW3100

 

Features

 

  • Automatic Measurement Mode: Only by selecting the measurement wavelength, the measurement parameters are automatically set, and the trace data is automatically saved and automatically analyzed.
  • Automatic Measurement Mode: Only by selecting the measurement wavelength, the measurement parameters are automatically set, and the trace data is automatically saved and automatically analyzed.
  • Multi-wavelength Measurement Mode: In the parameter setting, the wavelength can be automatically switched into the multi-wavelength measurement mode. Under this mode, the analysis can be achieved on the attenuation state of the same fiber section under different wavelengths.
  • Trace Fixing Function: It can achieve the same-screen comparison and display of one trace with another real-time trace or the trace under the average measurement, which is very useful for the installation of multi-core fiber or the checking of the aged fiber in the optical fiber network already been installed.
  • Multi-wavelength Analysis Function: It can achieve the comparison, display and analysis functions of any trace file.
  • FTTx online testing, able to identify the splitter and the fiber’s end.
  • Large-capacity lithium-ion rechargeable battery, with the long standby time over 8 hours.
  • Bellcore file format (.sor), with the storage of greater than 10,000 traces.
  • Communication Light Detection: It can effectively protect the test instrumentation and communication equipments.
  • Connection State Detection: To promptly know the connection status of the instrumentation and the fiber for test.
  • The Switching of Measurement Mode: Through the shortcut key operation, it can achieve the flexible switching of real-time measurement mode and average measurement mode.
  • Able to generate different forms of test reports according to user needs.
  • To provide various flexible printing modes: The single-page single-trace printing mode, the batch printing mode, the single-page multi-trace printing mode, the printing mode of multiwaveform display. To provide the personalized selection of printing options and page setup.
  • The Function of Waveform Difference Comparison: It can open several waveforms in the same window, making more easily the comparison of parameter change caused by fiber aging or other reasons.

Specifications

Technical Specifications1
Wavelength (nm) 850/1300 1310/1550 1310/1490/1550 1310/1550/1625
Dynamic range (dB)2 23/21 32/30 32/30/30 32/30/304
Pulse width (ns) 5,20,40,80,160,320,640,1280 5,20,40,80,160,320,640,1280,2560,5120,10240,20480
Event blind zone (m)3 2m 2m
Attenuation blind zone (m)3 9m 9m
Linearity (dB/dB) ±0.05 dB/ dB
Loss threshold (dB) 0.05
Loss resolution ratio (dB) 0.01
Sampling resolution ratio(m) 0.125 to 8
Sampling point 32K
Distance uncertainty (m) ±(1 m + 5×10-5M× distance + sampling interval)
Distance scope (km) 0.3 to180
Typical real-time refreshing duration (s) 0.2
Memory capacity of trace SD Card (2G), > 10000 pieces
Duration of measurement Defined by user; 5sec, 10sec, 15sec, 30sec, 1min, 2min, and 3min are selectable
General specification Interface category
Dimension (H×W×D) 150×235×66 Optical interface FC/UPC (PC, and APC are selectable)
Weight 1.5kg Data interface USB interface, SD card interface
Temperature Running temperature -10℃ to 50℃
Memory temperature -40℃ to 70℃ Visible failure orientation VFL
Relative humidity 0% to 95% (non condensation) Wavelength 650nm
Power supply Lithium battery; continuing working duration = 8 hours Output power (dBm) =-3
Warranty period 12 months Maximum testing distance 3km
Remarks: 1. The technical specification describes the ensured performance of the instrument when using typical PC model connector to measure. Without considering the uncertainty caused by optical fiber refractivity.
2. Dynamic range is the data measured under the condition of the maximum pulse width and 3 minutes of average time. Dynamic range is the data measured under the condition of 180km/20480ns/3min.
3. Measuring conditions of blind zone: reflection event is within 4Km, reflection strength < -35dB. Measured by the minimum pulse width.
4. Dynamic range measured when there is filter.

Standard Package:

Instrument, FC/PC Connector, Lithium Battery, Trace Manager Software CD, Data Cable , AC adaptor, Soft carrying case, Warranty card, CE certificate, Certificate of calibration, Quick reference guide.


Back to Top