Fiber Laser

Product Lines

Single Frequency Fiber Laser

Techwin single frequency fiber lasers have excellent performance, ultra-low frequency noise and amplitude noise. The linewidth of the output spectrum can reach Hz class. The side-mode suppression ratio of the output spectrum is in excess of 50dB.

1.0μm Single Frequency Fiber Laser

Techwin 1.0μm single frequency fiber lasers are low noise fiber lasers independently developed by patented technology. Techwin fiber laser uses all fiber ring cavity to realize stable linear polarization, single longitudinal mode and ultra-narrow single-frequency laser output. It can be applied to LIDAR, 3D scanning and range finding, etc.

1.5μm Single Frequency Fiber Laser

Techwin 1.5μm single frequency fiber lasers are low noise fiber lasers independently developed by patented technology. Techwin laser uses all fiber ring cavity to realize stable linear polarization, single longitudinal mode and ultra-narrow single-frequency laser output.

CW Fiber Laser

Techwin CW fiber laser is a highly integrated system source with high power. It employs all- fiber design and double cladding fiber pumping technology to achieve high power output with near diffraction-limited beam quality.

1.0μm Single Mode CW Fiber Laser

Techwin 1.0μm single mode CW fiber lasers of are a highly integrated continuous Yb-doped fiber laser system with high power output. These fiber lasers employ integrated design of all fiber structure and use double cladding fiber pumping technology, thus realizing high performance output laser.

1.5μm Single Mode CW Fiber Laser

Techwin 1.5μm CW fiber lasers are eye-safe high power fiber lasers. These fiber lasers employ integrated design of all fiber structure and use double cladding fiber pumping technology, thus realizing high performance output laser. The output power can be up to 10W and near diffraction-limited beam quality is achieved at the same time.

Pulse Fiber Laser

Techwin pulse fiber lasers for LiDAR are a high performance laser sources for lidar. Based on MOPA configuration , the pulsed fiber laser employ optimized double cladding fiber amplification technology to achieve high peak power and nanosecond pulses output. meanwhile it guarantees the maximum optical-optical conversion efficiency and minimum nonlinear effects and avoids the spectral broadening of the pulse signal during the process of amplifying.

1064nm Short Pulse Fiber Laser for LiDAR

Techwin 1064nm pulse fiber laser for LiDAR is a high peak power, high pulse energy laser source. Using MOPA configuration and all-fiber optimized design offer the high peak power and near diffraction-limited quality output beam. Techwin 1064nm pulse fiber lasers for are ideal sources for applications of 3D scanning, telemetry and range finding.

1550nm Short Pulse Fiber Laser for LiDAR

Techwin 1550nm short pulse fiber laser are an eye-safe pulse laser sources for LiDAR comes with high peak power, high energy. The all fiber design guarantees the robustness and maintenance-free operation of the system. This pulse laser is ideal for applications in LiDAR, range finding, 3D scanning and fiber sensing etc.


Back to Top